A while back I started getting in to the Op/Tech range of straps and connectors. This is the most versatile system I’ve found to date. With this system I can quickly attach my camera to either a neck strap, hang it from my backpack straps or fit a wrist strap thus:
Fit the straps to the backpack making sure the male connector end is on the right hand side as you look at it. Connect the uni-loop connectors to the camera with, importantly, the male connector on the left hand side as you look at the camera with the the lens front end pointing towards you.
Detach the uni-loop connectors and keeps as spares or for use with another camera,binoculars etc.).
Detach the padded part of the strap and keep the straps as spares or to use with another camera, I used mine for my binoculars.
With the system set up you can
- Attach the camera (or my binoculars) directly to the backpack straps or….
- Connect the camera (or binoculars) to the straps shown in figure 2 with these connected to the padded part show in figure 3 and you have a neck strap or….
- Disconnect any straps and attach the camera to the wrist strap. As an added safety measure I like to fit the wrist strap to the camera when changing between the backpack straps or the neck strap so that there’s always at least one strap connected to the camera.
- You can even use the straps shown in figure 2 and attach them to the backpack straps and extend the length even further but the straps are already long enough for my needs and the camera hangs comfortably resting on my chest.
Personally I’m enjoying using the camera attached to the backpack straps. The weight of the camera is taken up by the straps and ultimately by my shoulders and not my neck and also there’s one less strap hanging around my neck to get caught up in things.
Camera connected directly to the backpack straps shown in figure 1.
Camera connected to the the strap shown in figure 2 and the padded neck part shown in figure 3. I leave the straps and padded part connected together and stowed in my rucksack.
Camera connected to the wrist strap shown in figure 4.
I’m very impressed with the quality and design of the Op/Tech gear so I have ordered up one of their neoprene camera cases to replace the one shown above which should be a perfect fit for my Olympus EM-5 Mk 2 and M.Zuiko 12-40mm lens combination. This case has the advantage that it will remain attached to the camera when the camera is being used by means of a strap which attaches to the camera’s tripod screw fitting. They do a range of these cases to fit various makes and types of camera.
I have absolutely no affiliation with Op/Tech, I’m sharing because it might be of interest to someone out there on the Worldwide Interwebnet thingy. 🙂
If you are interested in the backpack shown above see this post for further information.