Anker Nano USB Power Bank

Hi everyone,

I’ve recently purchased one of these small USB power banks. I have several Anker power banks one of which usually lives in my camera bag whilst travelling which, over the years, has always served me well. I’m rarely off grid for long enough to concern myself too much with running out of power for my mobile devices, especially my camera as I usually carry a couple of extra charged batteries in my bag. The appeal to me of this particular power bank is a combination of its size: 7.7 x 3.68 x 2.5 cm, weight: 98.5 g and versatility rather than it’s charge capacity. I have bigger power banks should I need the extra battery capacity but these come at a premium regarding size and weight which runs contrary to my longstanding travelling as compact and light as is possible philosophy.

The unit has a fold out USB Type C connector and it plugs directly into my mobile phone and doesn’t add much weight so no cable required to connect the two together which is handy. it’s a firm fit but when attached I’d make a point of holding the phone and not the power bank to be on the safe side. It also has a Type C socket on the side, this socket is bi-directional and doubles as a charging port and second output port and the unit also comes with a Type C male to male cable to plug in and connect to another USB device eg. one of my USB dual camera chargers or maybe, with a USB Type C female to Micro USB Type B male adapter, my Bluetooth data logger, both of which also habitually travel with me in my camera bag.

I mentioned capacity, depending on one’s make and model of mobile phone it almost certainly isn’t going to charge a heavily discharged mobile phone battery to full power, that’s not what it’s designed to achieve, but it will serve in emergencies to top the phone battery up quite a bit until one can get to charge it normally. Likewise I can’t see myself using it very often to charge two devices simultaneously via its two Type C connections as that would drain it considerably faster. It came with about 25% charge or one of the four charging LEDs lit. I charged it with a standard, not fast, USB wall charger and it took approximately 1 hour and a quarter to charge to full capacity which is reasonably fast as I hate having to hang around whilst devices like this are charging. It also has passthrough charging to charge the power bank and attached device at the same time, not something that I will probably ever need to do with my typical usage as I have a mains-powered Anker 5-port USB charging hub that I always take on my travels but never the less another nice and potentially useful feature especially if one only has a single port USB charger. They also do a model with lightning connector suitable for I-Phones.

I’m always on the look out for ways to lighten and further compact my gear so a nifty little addition to my travelling kit as well as a nice little day-to-day unit to slip into one’s bag or pocket as and when one feels that it might be required.

Kind regards

Leigh

PS. I forgot to mention that, unlike my older power banks, when it’s connected to my Motorola Moto G30 phone it charges in fast charge “Turbo” mode same as the supplied mains wall charger which is a real boon when one need to get a good charge in quickly. As an example it charged my phone from 22% to 66% on fast charge before becoming depleted, this might improve slightly after several charge/discharge cycles. As they say “your mileage may vary”.

Follow up post to my Geotagging post.

Hi everyone,

I thought I’d post a couple of example screenshots showing a track file that I recorded on my GPS Data logger when I visited Brugge some years ago. The first is from Geosetter and the second, of the same track as displayed in GPS Track Editor.

On the left one can see the list of folders containing one’s shots, select the appropriate folder and then the images can be Geotagged to the location information contained in the selected track file and displayed on the map.

On the right of the shot one can see the individual track points and one can edit these if one wishes. It also gives an indication by colour on the map of the speed of travel as well as direction of travel arrows. One can select multiple track files and overlay them on the map so if one has recorded several days of travel around an area they can be viewed at the same time.

Apart from Geotagging my shots I have a love of maps, I studied Geographic Information Systems which included Satellite Remote Sensing at University so I really enjoy viewing my travels especially on a street map at ground level in Google Earth. πŸ™‚ To give an example, when strolling around one takes a picture of a building eg. a beautiful church and one doesn’t know it’s name but can subsequently easily locate it on the map and use it when naming one’s shot which has been useful to me on numerous occasions.

Kind regards

Leigh

Is my blog still of interest?

Hi everyone,

I was wondering if my blog was still of interest. I’ve been posting to my blog for more than ten years now, met lots of interesting folks from all walks of life that share my passion for photography and travel and had a lot of fun along the way, where has the time gone?! πŸ™‚ . Unfortunately and extremely frustratingly I’ve been unable to get out and take as many photos as I could in previous years however I try and seize every opportunity I get. I try and post what I hope are useful and interesting posts on photography related gear and techniques that I use as well as posting my photos as often as I’m able to. I’ve had to tighten my belt quite a lot in the last few years in order to significantly cut back on my online expenses such as my former website, online galleries and online print sales site subscriptions and concentrate on more important issues such as keeping a roof over our heads, food in our bellies, winter heating and a host of other domestic expenses. So maybe now is the time to examine if my Blog is still of interest to folks?.

Kind regards

Leigh

Geotagging your shots.

H everyone,

For some years I’ve been taking a small lightweight Bluetooth GPS data logger with me on my travels. This device is very useful when travelling as an aid to recording where my shots were taken especially when viewed at a later date when things aren’t so fresh in one’s memory. Simply switch it on before leaving for the day, pop it in one’s pocket or camera bag and switch it off again later. I have a Holux RCV-3000 data logger which I bought eight years ago now. It’s about the size of a matchbox has three LEDs on it which show GPS satellite connection status, Bluetooth active and power/charging status, an on/off switch and a Type B mini USB port. It runs off a small, inexpensive, easily obtainable, replaceable rechargeable battery for which I have a spare and also a separate USB battery charger so that I can charge a battery outside of the unit and the battery lasts quite a good time between charges and it can also be powered via USB, a USB power bank for example. It connects to either the computer by USB cable or my Android phone via Bluetooth connection so that one can download and view the track files. It also fits nicely in one of my waterproof battery cases. Unfortunately I don’t think the company is trading anymore but I’m sure that there must be alternative makes and models out there.

Software-wise I use a free program called Geosetter which comes with a program called EXIF Tool to sync the GPS track data to my photographs and write the location data to their EXIF information. I also use some software called GPS Track Editor to view and possibly edit the GPS tracks . These programs also show the location of the shots on a map which is very useful. The important thing is to make sure that the date and time setting in one’s camera are accurate, I set them before each trip to make sure as it’s this date and time information that’s used to sync the photos correctly to the location. You can also correct for different time zones eg. daylight saving time but I keep my camera set to UTC time whilst travelling.

For my Android phone I use an app called GPS Device Toolbox to download the track files via Bluetooth to my phone for backup at the end of the day and clear the device’s memory should it become full and the device’s internal memory can record up to 200,000 position data sets and I’ve set it to record a waypoint every 10 seconds which is generally more than sufficient for my needs. I use another app called GPS Track Viewer to view the track files on the mobile phone all these programs and apps are free at the time of writing. I think that there must be comparable software out there for Apple devices.

Additionally the data logger can act as a “Mock GPS Location Provider” and use it’s GPS rather than the phone’s inbuilt GPS via Bluetooth connection using the Bluetooth GPS app. There are cameras like my Olympus TG-5 with built in GPS and one could use the GPS in one’s phone but both would increase the battery drain on these devices, mission-critically in the case of my camera/s and for that reason I prefer to use a separately powered device. Along with my indispensable Anker 5-port USB charging hub and USB camera battery chargers it’s one bit of kit that packs itself.

Kind regards

Leigh

PS. Correction, the free version of Bluetooth GPS no longer supports Mock GPS Location, this free app does: Bluetooth GNSS , tested and working with my data logger.

I’ve been labouring this point for ages.

HI everyone,

Kind regards,

Leigh

Camera half cases, why fit them?.

Hi eveyone,

I’ve come to like camera half cases as can be seen in my previous post fitted to my Olympus OM-D E-M5 II and PEN-F camera models. I now have three, shortly to be four, of them fitted to my various camera models. For one, they add some extra protection from bumps, knocks and scuffs to the camera body as well as having a pop fastening flap for the battery compartment which proved very useful on one occasion in particular when the battery door broke on one of my cameras and I feel that they also improve the grip on the camera somewhat. They do also add a nice bit of retro styling to the camera which I like but that’s not the principal reason why I chose to fit them. I’ve also added Tile lost and found QR Code labels to the bottom of the cases as there’s nowhere on the camera bodies to attach them to. One can pick up the faux-leather ones for most models of camera on the likes of Ebay etc. and they’re quite inexpensive as camera accessories go.

If one values one’s gear, and what photographer doesn’t?, I think that fitting these is a “no-brainer” as my American friends say. Bash one of these and you can throw it away and cheaply replace it. Bash your camera body and that’s a totally different proposition with the considerable expense, inconvenience and hassle of getting it fixed always assuming that one can with out of production camera models, there’s more than a strong probability that it wouldn’t be cost-effective. At best you’ll reduce any re-sale value, at the very worst it could be a write off.

Kind regards

Leigh

“Onwards to the castle”

Hi everyone,

Another shot of Cowdray Castle, Midhurst, West Sussex, UK

Best wishes,

Leigh

“Cowdray Castle”

Hi everyone,

Cowdray Castle, Midhurst, West Sussex, UK. Olympus M.Zuiko 9-18mm lens.

Kind regards

Leigh

Corfu Town

Hi everyone,

Another of my shots from Corfu.

Best wishes,

Leigh

“All the fun of the fair 2”

Hi everyone,

Fair, Bognor Regis seafront.

Best wishes,

Leigh